Timing Belt TENSIONER Pulley Assembly
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - TENSIONER PULLEY |
| 2 - PIVOT BOLT |
| 3 - TENSIONER BRACKET |
NOTE:
The tensioner pulley (1), bracket (3), and pivot bolt (2) is serviced as an assembly.
- Inspect pulley (1) for free movement. Replace if pulley is loose, seized, or rough turning. See Fig 1.
- Inspect pulley bearing and seal. Replace if damaged.
- Inspect pivot bolt (2) for free movement in assembly housing. Replace assembly if seized or excessive looseness.