LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (3.5L Engine (Service Information)) >> Valve Timing >> Belt-Timing And Sprockets >> Removal >> Crankshaft Sprocket

Crankshaft Sprocket

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Crankshaft Sprocket
GC0002001Courtesy of CHRYSLER LLC
1 - SPECIAL TOOL L-4407-A
  1. Remove the timing belt. See REMOVAL .
  2. Remove crankshaft sprocket using Special Tool L-4407-A (1). See Fig 1.
scientia non olet · About LEMON Manuals