LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (3.5L Engine (Service Information)) >> Valve Timing >> Belt-Timing And Sprockets >> Installation >> Crankshaft Sprocket

Crankshaft Sprocket

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Crankshaft Sprocket
GC0002003Courtesy of CHRYSLER LLC
1 - INSTALL WITH SPECIAL TOOL 6641 WITH 12 mm SCREW C-4685-C1 AND THRUST BEARING AND WASHER
CAUTION: To ensure proper installation depth of crankshaft sprocket, Special Tool 6641 must be used.
  1. Install crankshaft sprocket using Special Tools 6641 (1) and C-4685-C1. See Fig 1.
  2. Install timing belt. See INSTALLATION .
scientia non olet · About LEMON Manuals