LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (3.5L Engine (Service Information)) >> System-Air Intake >> Element-Air Cleaner >> Removal >> Removal

Element-Air Cleaner: Removal: Removal

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Air Cleaner Housing
GC0015409Courtesy of CHRYSLER LLC
1 - AIR INLET DUCT TO THROTTLE BODY
2 - AIR CLEANER HOUSING COVER
3 - LOCKING TABS
4 - CCV HOSE
  1. Disconnect the CCV hose (4) at the housing cover (2). See Fig 1.
  2. Release the housing cover tabs (3). See Fig 1.
    Fig 2: Air Cleaner Element
    GC0015408Courtesy of CHRYSLER LLC
    1 - AIR CLEANER COVER
    2 - ELEMENT
    3 - CCV HOSE
  3. Lift the cover (1) and pull toward the front of the vehicle to release the rear cover to housing alignment tabs. See Fig 2.
  4. Remove the element (2).