Pump - Oil: Removal: Pump-Oil

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Oil Pump

Courtesy of CHRYSLER LLC

1 - OIL PUMP

2 - GASKET

Drain the cooling system. Refer to STANDARD PROCEDURE .
Remove the timing belt. See REMOVAL .
Remove the crankshaft sprocket. See REMOVAL .

Remove the oil pan. See REMOVAL .

Fig 2: Windage Tray & Oil Pick up Tube

Courtesy of CHRYSLER LLC

1 - OIL PICK UP TUBE WITH STRAINER

2 - BOLT

3 - O-RING

4 - OIL PUMP

5 - WINDAGE TRAY

Remove the oil pickup tube. See Fig 2.

Fig 3: Oil Pump & Crankshaft Gear

Courtesy of CHRYSLER LLC

1 - CRANKSHAFT

2 - DOWEL

3 - GASKET

4 - OIL PUMP

5 - FRONT CRANKSHAFT SEAL

6 - CRANKSHAFT GEAR

7 - PIN

Remove the oil pump fasteners. Remove the oil pump and gasket from engine. See Fig 3.