Checking Engine Oil Pressure
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - OIL PRESSURE SWITCH |
| 2 - ENGINE OIL COOLER |
| 3 - ENGINE OIL FILTER |
Check oil pressure using a gauge at oil pressure switch (1) location. See Fig 1.
- Remove the oil pressure switch (1). See REMOVAL .
- Install oil pressure test gauge, C-3292 with Adapter 8406. For Special Tool identification, see SPECIAL TOOLS . CAUTION: If oil pressure is 0 at idle, Do Not Run engine at 3000 RPM.
- Warm engine to normal operating temperature.
- Monitor gauge readings at idle and 3000 RPM. For specifications, see SPECIFICATIONS .