LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (3.5L Engine (Service Information)) >> Engine Mounting >> Mount Right - AWD >> Removal >> Right Mount - AWD

Right Mount - AWD

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Right Engine Mount - AWD
GC0015430Courtesy of CHRYSLER LLC
1 - GENERATOR
2 - RIGHT ENGINE MOUNT
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle.
  3. Remove the right front wheel.
  4. Place a jack stand under the engine.
  5. Remove the engine mount to cradle fastener.
  6. Raise the engine with the jack stand and support the engine weight.
  7. Remove the engine mount bolts and the engine mount. See Fig 1.
scientia non olet · About LEMON Manuals