Left Mount - AWD
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - GENERATOR |
| 2 - RIGHT ENGINE MOUNT |
- Carefully position the engine mount and hand tighten the mount retaining bolts. See Figure.
- Tighten the engine mount to bracket bolts to 60 N.m (44 lbs. ft.).
- Lower the engine onto the cradle and remove the jack stand.
- Tighten the engine mount to cradle bolt to 75 N.m (55 lbs. ft.).
- Install the right front wheel.
- Lower the vehicle.
- Connect the negative battery cable.