LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (3.5L Engine (Service Information)) >> Engine Mounting >> Mount Left - AWD >> Removal >> Left Mount-AWD

Left Mount-AWD

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Left Engine Mount - AWD
GC0015429Courtesy of CHRYSLER LLC
1 - ENGINE MOUNT BRACKET
2 - LEFT ENGINE MOUNT
3 - AIR CONDITIONING COMPRESSOR
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle.
  3. Remove the left front wheel.
  4. Remove the left engine mount to cradle fastener.
  5. Place a jack stand under the engine and support the engine weight.
  6. Remove the engine mount fasteners and remove the mount. See Fig 1.
scientia non olet · About LEMON Manuals