LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (3.5L Engine (Service Information)) >> Cylinder Head(S) >> Valves & Seats -Intake/Exhaust >> Removal >> Valves

Valves & Seats -Intake/Exhaust: Removal: Valves

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cylinder head(s). See REMOVAL .
  2. Remove rocker arm assembly. See REMOVAL .
  3. Remove valve spring(s). See REMOVAL .
  4. Before removing valve, remove any burrs from valve stem lock grooves to prevent damage to the valve guides.  Identify valves to insure installation in original location.
  5. Remove valve(s) from cylinder head.
scientia non olet · About LEMON Manuals