Valves & Seats -Intake/Exhaust: Inspection: Valves
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - MARGIN |
| 2 - FACE |
| 3 - STEM |
| 4 - VALVE SPRING RETAINER LOCK GROOVES |
- Measure valve stems for wear approximately 60 mm (2.36 in.) below the valve lock grooves. See Fig 1.
- Compare measurement to specifications. See SPECIFICATIONS .
NOTE:
Valve stems are chrome plated and should not be polished. See Fig 1.