Rocker Arms
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - RETAINER |
| 2 - SWIVEL PAD |
| 3 - ROLLER |
Rocker arms are made of light weight permanent mold aluminum alloy with a roller (3) type follower operating against the camshaft. See Fig 1. The valve actuating end of the rocker arms are machined to retain hydraulic lash adjusters, eliminating the need for manual valve lash adjustment.