Cylinder Head(S): Camshaft(S): Removal: Camshaft

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cylinder Head, Camshaft & Rocker Arm

Courtesy of CHRYSLER LLC

1 - SPARK PLUG TUBE

2 - ROCKER ARM ASSEMBLY

3 - CAMSHAFT

4 - SEAL

NOTE: Camshafts are removed from the rear of each cylinder head.

Remove the cylinder head. See REMOVAL .
CAUTION: Care must be taken not to nick or scratch the journals when removing the camshaft.
Carefully remove the camshaft (3) from the rear of the cylinder head. See Fig 1