LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (3.5L Engine (Service Information)) >> Block -Cylinder >> Seal -Crankshaft Oil Front >> Installation >> Seal-Crankshaft Oil Front

Seal-Crankshaft Oil Front

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Crankshaft Oil Seal With Special Tool 6342-Installation
GC0001900Courtesy of CHRYSLER LLC
1 - SPECIAL TOOL 6342
  1. Install crankshaft seal using Special Tool 6342 (1). See Fig 1.
  2. Install the dowel pin into the crankshaft to 1.2 mm (0.047 in.) protrusion.
  3. Install the crankshaft sprocket. See INSTALLATION .
scientia non olet · About LEMON Manuals