LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (3.5L Engine (Service Information)) >> Block -Cylinder >> Seal - Crankshaft Oil Rear >> Removal >> Seal-Crankshaft Oil Rear

Seal-Crankshaft Oil Rear

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Main Seal & Retainer
GC0015422Courtesy of CHRYSLER LLC
1 - CRANKSHAFT
2 - REAR CRANKSHAFT OIL SEAL
3 - REAR CRANKSHAFT OIL SEAL RETAINER
4 - ENGINE BLOCK
  1. Remove the engine oil pan. See REMOVAL .
  2. Lower the weight of the engine back onto the engine mounts.
  3. Remove transmission from vehicle.
  4. Remove the flex plate.
  5. Remove the rear crankshaft oil seal retainer bolts.
  6. Remove the crankshaft oil seal and clean all mating surfaces.
scientia non olet · About LEMON Manuals