Plate - Flex: Installation: Plate-Flex
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
| 1 - FLEX PLATE |
| 2 - BOLT (QTY. 8) |
| 3 - BACKING PLATE |
- Position flex plate (1) with backing plate (3) on the crankshaft. See Fig 1.
- Apply Mopar® Lock & Seal Adhesive to the flex plate bolts (2).
- Install flex plate bolts (2). See Fig 1. Tighten bolts to 95 N.m (70 ft. lbs.).
- Install the transmission.