LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (3.5L Engine (Service Information)) >> Block -Cylinder >> Inspection >> Block-Cylinder >> Engine Block

Engine Block

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean cylinder block thoroughly and check all core hole plugs for evidence of leaking.
  2. If new core plugs are to be installed, see STANDARD PROCEDURE .
  3. Examine block and cylinder bores for cracks or fractures.
  4. Check block deck surfaces for flatness. Deck surface must be within service limit of 0.1 mm (0.004 in.).
scientia non olet · About LEMON Manuals