Damper - Crankshaft: Removal: Damper-Crankshaft

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Serpentine Accessory Drive Belt

Courtesy of CHRYSLER LLC

1 - DRIVE BELT TENSIONER

2 - POWER STEERING PULLEY

3 - AIR CONDITIONING COMPRESSOR

4 - CRANKSHAFT DAMPER

5 - GENERATOR

6 - DRIVE BELT

Disconnect negative battery cable.
Remove the accessory drive belt. Refer to REMOVAL .
Raise vehicle on hoist.

Fig 2: Removing Crankshaft Damper
Courtesy of CHRYSLER LLC

1 - SPECIAL TOOL 1023 PULLER

2 - SPECIAL TOOL 9020-R INSERT
Remove crankshaft damper bolt.
Use 1023 puller, and insert 9020-R, remove crankshaft damper. See Fig 2.