LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (2.7L Engine (Service Information)) >> Manifolds >> Manifold-Intake >> Removal >> Manifold-Intake - Upper

Manifold-Intake - Upper

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Battery
GC0015222Courtesy of CHRYSLER LLC
  1. Disconnect negative battery (1) cable.
    Fig 2: Air Cleaner Housing
    GC0015232Courtesy of CHRYSLER LLC
  2. Remove throttle body air inlet hose and air cleaner housing assembly (3). See REMOVAL .
  3. Disconnect electrical connectors from the following components:
    1. Manifold Absolute Pressure (MAP) Sensor
    2. Electronic Throttle Control
    3. Manifold Tuning Valve
  4. Disconnect Vapor Purge hose, Brake Booster hose, Positive Crankcase Ventilation (PCV) hose.
    Fig 3: Intake Brackets
    GC0015234Courtesy of CHRYSLER LLC
  5. Remove manifold support brackets (1).
  6. Remove the upper EGR tube from the intake manifold, and the upper EGR tube from the EGR valve.
    Fig 4: Identifying Manifold Attaching Bolts Torque Sequence
    GC0015374Courtesy of CHRYSLER LLC
  7. Remove manifold attaching bolts.
    Fig 5: Intake Brackets
    GC0015234Courtesy of CHRYSLER LLC
  8. Remove upper manifold (2).
  9. Remove foam insulator (3).
  10. Inspect manifold (2). See INSPECTION .
scientia non olet · About LEMON Manuals