LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (2.7L Engine (Service Information)) >> Manifolds >> Manifold-Intake >> Removal >> Manifold-Intake - Lower

Manifold-Intake - Lower

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Battery
GC0015222Courtesy of CHRYSLER LLC
  1. Release fuel system pressure. Refer to STANDARD PROCEDURE .
  2. Disconnect negative battery (1) cable located in trunk.
  3. Remove upper intake manifold. See REMOVAL .
    Fig 2: Injector Connectors
    GC0015235Courtesy of CHRYSLER LLC
  4. Disconnect injector electrical connectors (2).
  5. Disconnect fuel supply hose (1) from fuel rail. Refer to STANDARD PROCEDURE .
    Fig 3: Lower Intake Manifold Tightening Sequence
    GC0015375Courtesy of CHRYSLER LLC
  6. Remove bolts attaching fuel rail (1 - 4).
  7. Remove fuel rail and injectors as an assembly.
  8. Remove manifold attaching bolts.
  9. Remove lower manifold.
  10. Inspect manifold. See INSPECTION .
scientia non olet · About LEMON Manuals