LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (2.7L Engine (Service Information)) >> Engine Block >> Seal- Crankshaft Front Oil >> Removal >> Seal-Crankshaft Oil Front

Seal-Crankshaft Oil Front

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Crankshaft Front Oil Seal
GC0015326Courtesy of CHRYSLER LLC
  1. Remove crankshaft vibration damper. See REMOVAL .
  2. Install Special Tool 8194 (1), Insert into crankshaft nose. Remove seal using Special Tool 6771, Remover.
scientia non olet · About LEMON Manuals