LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (2.7L Engine (Service Information)) >> Engine Block >> Seal- Crankshaft Front Oil >> Installation >> Seal - Crankshaft Oil Front

Seal - Crankshaft Oil Front

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Crankshaft Front Oil Seal
GC0015327Courtesy of CHRYSLER LLC
  1. Install new seal (4) using Special Tools 6780-2 Sleeve (1), 6780-1 Installer (3), and 8179 Stud (2).
  2. Install crankshaft vibration damper. See INSTALLATION .
scientia non olet · About LEMON Manuals