LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (2.7L Engine (Service Information)) >> Cylinder Head >> Valves & Seats-Intake/Exhaust >> Removal >> Valves

Valves & Seats-Intake/Exhaust: Removal: Valves

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Valve Spring Installed Height
GC0015306Courtesy of CHRYSLER LLC
  1. Remove cylinder head(s). See REMOVAL .
  2. Remove valve spring (3). See REMOVAL .
    Fig 2: Intake & Exhaust Valves
    GC0015304Courtesy of CHRYSLER LLC
  3. Before removing valves (3), remove any burrs from valve stem retainer lock grooves (2) and stem tip (1) to prevent damage to the valve guides. 
  4. Remove valve. Identify each valve to ensure installation in original location.
scientia non olet · About LEMON Manuals