Valve And Guide: Valves
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Clean and inspect valves thoroughly. Replace burned, warped and cracked valves.
- Inspect retainer lock grooves for wear or damage (2).
- Inspect valve face (4) for wear and pitting.
- Measure valve stems (3) and margins (5) for wear. For valve specifications, see SPECIFICATIONS .
NOTE:
Valve stems (3) are chrome plated and should not be polished.