LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (2.7L Engine (Service Information)) >> Cylinder Head >> Seals-Valve Stem >> Removal >> Valve Stem Seals (In-Vehicle)

Valve Stem Seals (In-Vehicle)

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Valve Seal And Spring Seat Assembly
GC0015307Courtesy of CHRYSLER LLC
  1. Remove valve spring (3). See REMOVAL .
    Fig 2: Removing Valve Stem Seal
    GC0015309Courtesy of CHRYSLER LLC
  2. Remove valve stem seal by using a valve seal tool (1).
scientia non olet · About LEMON Manuals