LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (2.7L Engine (Service Information)) >> Cylinder Head >> Seals-Valve Stem >> Installation >> Valve Stem Seals (In-Vehicle)

Valve Stem Seals (In-Vehicle)

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Valve Seal And Spring Seat Assembly
GC0015307Courtesy of CHRYSLER LLC
  1. The valve stem seal/valve spring seat (4) should be pushed firmly and squarely over the valve guide using the valve stem (5) as guide. Do Not Force  seal against top of guide.
  2. Install valve spring (3). See INSTALLATION .
scientia non olet · About LEMON Manuals