LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (2.7L Engine (Service Information)) >> Cylinder Head >> Adjusters-Hydraulic Lash >> Removal >> Hydraulic Lash Adjusters

Hydraulic Lash Adjusters

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cylinder head cover(s). See REMOVAL .
  2. Remove rocker arm(s). See REMOVAL .
    CAUTION: If lash adjusters and rocker arms are to be reused, always mark position for reassembly in their original positions.
  3. Remove lash adjuster(s).
scientia non olet · About LEMON Manuals