LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (2.7L Engine (Service Information)) >> Cylinder Head >> Adjusters-Hydraulic Lash >> Installation >> Hydraulic Lash Adjusters

Hydraulic Lash Adjusters

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install hydraulic lash adjuster making sure adjusters are at least partially full of oil. This can be verified by little or no plunger travel when lash adjuster is depressed.
  2. Install rocker arm(s). See INSTALLATION . Install cylinder head covers. See INSTALLATION .
scientia non olet · About LEMON Manuals