Section 24 (Engine & Automatic Transmission Cooling System): Engine: Fan-Radiator: Installation
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - RADIATOR FAN ASSEMBLY |
| 2 - ELECTRICAL CONNECTOR |
| 3 - UPPER RADIATOR HOSE |
- Position radiator cooling fan assembly (1) in vehicle.
- Install cooling fan mounting bolts. Tighten to 6 N.m (50 in. lbs.)
- Connect cooling fan electrical connector (2).
- Install upper radiator hose (3).
- Fill cooling system (Refer to COOLING - STANDARD PROCEDURE) .
- Operate engine until it reaches normal operating temperature. Check cooling system and automatic transmission for correct fluid levels.