LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine & Automatic Transmission Cooling System) >> Engine >> Engine Coolant Temp Sensor >> Removal >> 2.7L Engine

2.7L Engine

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Coolant Sensor - 2.7L
GC0014703Courtesy of DAIMLERCHRYSLER CORP.
1 - ENGINE COOLANT SENSOR
2 - ELECTRICAL CONNECTOR
3 - COOLANT OUTLET TUBE
  1. Disconnect negative battery cable.
  2. Partially drain cooling system (Refer to COOLING - STANDARD PROCEDURE) .
  3. Disconnect the electrical connector (2).
  4. Remove engine coolant sensor (1) from coolant outlet tube (3).
scientia non olet · About LEMON Manuals