LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine & Automatic Transmission Cooling System) >> Engine >> Engine Coolant Temp Sensor >> Installation >> 2.7L Engine

2.7L Engine

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Coolant Sensor - 2.7L
GC0014703Courtesy of DAIMLERCHRYSLER CORP.
1 - ENGINE COOLANT SENSOR
2 - ELECTRICAL CONNECTOR
3 - COOLANT OUTLET TUBE
  1. Apply thread sealant to sensor threads.
  2. Install engine coolant temperature sensor (1) into coolant outlet tube (3).
  3. Tighten sensor to 28 N.m (20 ft. lbs.) torque.
  4. Connect electrical connector (2) to engine coolant temperature sensor (1).
scientia non olet · About LEMON Manuals