LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Anti-Lock Brake System & Adjustable Pedals - Electrical Diagnostics) >> Electrical Diagnostics >> Abs >> DTC Troubleshooting >> U1104-Can C Bus CRC Performance >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. VERIFY DTC IS ACTIVE 

    Turn the ignition on.

    With the scan tool, read and record ABS DTCs.

    With the scan tool, read and record Environmental Data (EV Data).

    With the scan tool, erase ABS DTCs.

    Cycle the ignition switch.

    With the scan tool, read ABS DTCs.

    Does this DTC reset? 

    Yes 

    1. Replace the Dynamics Sensor in accordance with the Service Information.
    2. Perform ABS VERIFICATION TEST .

    No 

    1. Refer to the ABS INTERMITTENT CONDITION  diagnostic procedure.