210 Mm RII Axle
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
SPECIFICATIONS
| DESCRIPTION | SPECIFICATION |
|---|---|
| Axle Ratios | 2.82 |
| Ring Gear Diameter | 210 mm (8.3 in.) |
| Ring Gear Backlash | 0.10-0.16 mm (0.004-0.006 in.) |
| Side Bearing Preload | 6-8000 N |
| Axle Housing Retained Spread | 0.11 mm to 0.17 mm (0.004 in. to 0.007 in.) |
| Select Snap Ring Size | 3.60-4.50mm (0.14-0.17 in.) In 0.02mm (0.0007 in.) increments |
| Select Pinion Shim Size | 1.40-2.50mm (0.05-0.10 in.) In 0.01mm (0.0004 in.) increments |
| Pinion Torque To Rotate | 2.25N.m (20 in. lbs.) |
| Total Torque To Rotate (Approx.) | 3.38N.m (30 in. lbs.) |
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Plug, Rear Axle Drain/Fill | 50 | 37 | - |
| Bolt, Differential Cover | 50 | 37 | - |
| Bolt, Ring Gear-to-Differential Case | 85 | 64 | - |
| Bolt, Axle Housing-to-Crossmember | 220 | 162 | - |
| Bolt/Nut, Axle Front Mount Isolator | 65 | 48 | - |
| Bolt/Nut, Propeller Shaft Coupler to Axle Flange | 58 | 43 | - |