210 Mm Axle Housing Cover
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Thoroughly clean cover and install a 4 mm (0.157 in.) bead of Mopar® AXLE RTV (2) as shown.
- Immediately install cover. Install and torque bolts (1) to 50 N.m (37 ft. lbs.).
- Install axle assembly to vehicle. See INSTALLATION .