Specifications - 198 Mm RII Axle
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
SPECIFICATIONS
| DESCRIPTION | SPECIFICATION |
|---|---|
| Axle Ratios | 3.07, 3.64, 3.90 |
| Ring Gear Diameter | 198 mm (7.8 in.) |
| Ring Gear Backlash | 0.13-0.18 mm (0.005-0.007 in.) |
| Side Bearing Preload | 6000-8000 N |
| Axle Housing Retained Spread | 0.18 mm to 0.23 mm (0.007 in. to 0.009 in.) |
| Select Snap Ring Size | 3.60-4.68 mm (0.14-0.18 in.) In 0.02mm (0.0007 in.) increments |
| Select Pinion Shim Size | 1.40-2.50mm (0.05-0.10 in.) In 0.01mm (0.0004 in.) increments |
| Pinion Torque To Rotate | 2.25N.m (20 in. lbs.) |
| Total Torque To Rotate (Approx.) | 3.38N.m (30 in. lbs.) |
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Plug, Rear Axle Drain/Fill | 60 | 44 | - |
| Bolt, Differential Cover | 30 +45° | 22 + 45° | - |
| Bolt, Ring Gear-to-Differential Case | 85 | 64 | - |
| Bolt, Axle Housing-to-Crossmember | 220 | 162 | - |
| Bolt/Nut, Axle Front Mount Isolator | 65 | 48 | - |
| Bolt/Nut, Propeller Shaft Coupler-to-Axle Flange | 58 | 43 | - |