198 Mm Differential Cover
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- After thoroughly cleaning axle housing cover (1), apply a 4 mm (0.157 in.) bead (2) of Mopar® Axle RTV as shown.
- Immediately install cover (2) to axle housing. Install and torque axle housing cover bolts (1) to 30 N.m (22 ft. lbs.) + 45°.
- Install axle assembly to vehicle. See INSTALLATION .