LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Exhaust System And Turbocharger) >> Turbocharger System >> Motor-Boost Pressure Servo >> Removal >> Removal

Motor-Boost Pressure Servo: Removal: Removal

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Servomotor
GC0039548Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner housing.
  3. Remove the turbo heat shield.
  4. Remove circlip from actuator rod at turbocharger end (2).
  5. Remove mounting bolts and remove servomotor and actuator rod (3).
  6. Remove circlip and actuator rod from servomotor (1).
scientia non olet · About LEMON Manuals