Section 231 (Exhaust System And Turbocharger): Resonator: Removal: Removal-6.1L
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The normal operating temperature of the exhaust system is very high. Therefore, never work around or attempt to service any part of the exhaust system until it is cooled. Special care should be taken when working near the catalytic converter. The temperature of the converter rises to a high level after a short period of engine operation time.
- Raise vehicle.
- Remove the bolt (2).
- Remove isolators (1).
- Remove LH resonator and tailpipe assembly (5).