LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Fuel System) >> Fuel Injection >> Valve - Manifold Tune >> Removal >> Valve - Manifold Tune - 3.5

Valve - Manifold Tune - 3.5

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Manifold Tuning Valve & Short Runner Valve
GC0013134Courtesy of CHRYSLER LLC
1 - Manifold Tuning Valve
2 - Short Runner Valve
  1. Manifold Tuning Valve location.
    Fig 2: Mounted Valve
    GC0013135Courtesy of CHRYSLER LLC
  2. Disconnect negative battery cable.
    Fig 3: Electrical Connector
    GC0013136Courtesy of CHRYSLER LLC
  3. Remove the electrical connector.
  4. Remove the 2 mounting bolts.
    Fig 4: Manifold Tune Valve - 3.5L
    GC0013133Courtesy of CHRYSLER LLC
  5. Remove the Manifold Tuning Valve.