LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Fuel System) >> Fuel Injection >> Valve - Manifold Tune >> Installation >> Valve - Manifold Tune - 2.7

Valve - Manifold Tune - 2.7

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Manifold Tune Valve 2.7L
GC0013131Courtesy of CHRYSLER LLC
  1. Install the Manifold Tuning Valve.
  2. Install the 2 mounting bolts.
  3. Tighten bolts to 2.8 N.m (25 in. lbs.).
    Fig 2: Installing Manifold Tune Valve - 2.7L
    GC0013132Courtesy of CHRYSLER LLC
  4. Connect the electrical connector and lock connector.
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals