Sensor - Map - 6.1L

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: MAP Sensor Location - 6.1L

Courtesy of CHRYSLER LLC

The Manifold Absolute Pressure (MAP) sensor (2) is located at the rear of the intake manifold (1).

Fig 2: MAP Sensor Mounting - 6.1L

Courtesy of CHRYSLER LLC

Disconnect electrical connector at sensor.
Remove two sensor mounting bolts (3).
Check condition of sensor o-ring (2).