Sensor - Map - 3.5L

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: MAP Location

Courtesy of CHRYSLER LLC

Sensor location.
Disconnect negative battery cable.

Fig 2: Electrical Connector
Courtesy of CHRYSLER LLC
Unlock the electrical connector.

Fig 3: Electrical Connector
Courtesy of CHRYSLER LLC
Disconnect the electrical connector.

Fig 4: Turning Sensor 1/4 Turn
Courtesy of CHRYSLER LLC
Rotate sensor 1/4 turn clockwise.
Pull up on sensor.

Fig 5: Removing/Installing Manifold Absolute Pressure Sensor
Courtesy of CHRYSLER LLC
Remove sensor.