Sensor - Inlet Air Temperature - 3.5L

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inlet Air Temperature Sensor Location

GC0013127

Courtesy of CHRYSLER LLC

Sensor location.
Disconnect negative battery cable.

Fig 2: Connector Unlocked
Courtesy of CHRYSLER LLC
Unlock the electrical connector.
Remove electrical connector from sensor.

Fig 3: Sensor Orientation
Courtesy of CHRYSLER LLC
Note sensor orientation.
Remove sensor.