Sensor - Crankshaft Position - 2.7L

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sensor Location - 3.5L

Courtesy of CHRYSLER LLC

Disconnect negative battery cable.
Raise vehicle and support.

Fig 2: Locating Crankshaft Position Sensor
Courtesy of CHRYSLER LLC
Unlock and disconnect the electrical connector.
Remove mounting bolt.
Remove sensor.