LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Fuel System) >> Fuel Injection >> Operation >> Modes Of Operation >> Wide-Open-Throttle Mode

Wide-Open-Throttle Mode

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

This is an OPEN LOOP mode. During wide-open-throttle operation, the following inputs are used by the PCM:

  1. Inlet/Intake air temperature
  2. Engine coolant temperature
  3. Engine speed
  4. Knock sensor
  5. Manifold absolute pressure
  6. Throttle position

When the PCM senses a wide-open-throttle condition through the Throttle Position Sensor (TPS) it de-energizes the A/C compressor clutch relay. This disables the air conditioning system and disables EGR (if equipped).

The PCM adjusts injector pulse width to supply a predetermined amount of additional fuel, based on MAP and RPM.