LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Fuel System) >> Fuel Injection >> Body - Throttle >> Removal >> Body - Throttle - 3.5L

Body - Throttle - 3.5L

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inlet Hose
GC0013153Courtesy of CHRYSLER LLC
  1. Disconnect negative cable from battery
  2. Remove the inlet hose from throttle body.
    Fig 2: Throttle Body Bracket
    GC0013154Courtesy of CHRYSLER LLC
  3. Disconnect electrical connectors.
  4. Disconnect vacuum hose.
  5. Remove the throttle body support bracket.
  6. Remove throttle body bolts.
    Fig 3: Throttle Body Removed
    GC0013152Courtesy of CHRYSLER LLC
  7. Clean mating surfaces.
scientia non olet · About LEMON Manuals