LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Fuel System) >> Fuel Injection - Diesel >> Sensor-Mass Air Flow (MAF) >> Removal >> Manifold Air Flow Sensor

Manifold Air Flow Sensor

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Detach the air hose at the Mass Air Flow (MAF) sensor
  3. Unplug the MAF wiring harness connector.
  4. Remove the screws retaining the MAF sensor to the air cleaner housing, and remove MAF sensor.
scientia non olet · About LEMON Manuals