Inlet Air Temperature Sensor
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - INTAKE AIR TEMPERATURE SENSOR |
| 2 - AIR CONTROL VALVE |
| 3 - AIR CONTROL VALVE EXTENSION |
| 4 - LOWER CHARGE AIR HOSE |
- Disconnect the negative battery cable.
- Unplug the wiring harness connector at the intake air temperature sensor (1). See Fig 1.
- Press together the sensor locking arms and remove the sensor (1) from the air control valve extension (3).