LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Body - Interior & Exterior) >> Seats >> Riser-Front >> Removal >> Manual Length Adjuster

Manual Length Adjuster

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Passenger Seat Manual Track
GC0013581Courtesy of DAIMLERCHRYSLER CORP.
  1. Before proceeding with the following repair procedure, review all warnings and cautions. (Refer to BODY/SEATS - WARNING) 
  2. Remove the seat. (Refer to BODY/SEATS/SEAT - REMOVAL) 
  3. Move the seat to the forward position on the tracks and remove the seat adjuster bolts/nuts (3).
  4. Move the seat to the reward position on the tracks and remove the front seat adjuster bolts/nuts (3).
    NOTE: Passenger seat with strain gauges shown, drivers side seat similar.
  5. Disconnect strain gauge electrical connectors (1), if equipped.
  6. If equipped, remove the strain gauge bolts (2) and remove the strain gauges as necessary.
scientia non olet · About LEMON Manuals