Liftgate Opening Upper Trim: Removal
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Using a trim stick or another suitable wide flat-bladed tool, carefully pry the rear edge of the trim plate (3) down from the upper liftgate opening header (2) far enough to disengage the four spring clip retainers from the slots in the header.
- Pull the trim plate rearward to disengage it from the rear edge of the headliner (1).
- Remove the trim plate from the vehicle.